72cavaties plastic slider and puller injection mould
|Product||Plastic slider with puller|
|Required machine||180T injection machine|
|Mould cavity||72 pcs/mould|
1-MOQ of slider plastic injection mould: MOQ 1 set mould.
2-Available material of slider plastic injection mould:the most important material is from original Japan Hitachi, Sweden ASSAB, or as per customers’ requirement.
3-Workmanship: Heat treatment from original Hitachi factory. All workmanships of plastic injection mould are done by technicians who have more than 10 years experience.
4-Accuracy: Drawings are made strictly as per sample or customers’ requirement and our engineer who have more than 25 years experience can give you professional advice once we found there is something need to be changed or improved for your samples. Slider plastic injection moulds will be strictly made as per drawing. And we required our technicians to make as less error as possible so that the injection moulds will run well and makes good products.
5-Inspection: We have complete quality inspection rules to make sure that all the plastic injection moulds are in good quality. We will check material before production, check processing and size during production, check product size and mould condition by testing injection mould after finishing production. We will test at least 500 shots for each plastic injection mould. And we will offer " Mould Inspection Report" after testing slider injection mould.
6-After sale service: We will keep following up the plastic injection mould condition after shipment. We will try our best and help customer to find the best solution. We are the strong technical support of our customers.
View of Factory